A stranding machine is a device used for stranding, which means twisting insulated cores together, adding fillers, and wrapping. It is suitable for stranding and armoring various cross-sectional multi-core rubber-sheathed cables, plastic cables, cross-linked cables, telephone cables, and control cables.
Today, the editor will introduce the operation and precautions of the stranding machine to everyone:
1. Preparations before starting the machine
(1) The operator first checks the lubrication of all rotating parts of the machine, whether the position of the speed change handle is in place, whether all parts of the machine are normal, whether the cage flips flexibly, whether the twist pin is placed correctly, whether the cradle bolt is tightened, and whether all safety devices are in good condition. After the inspection is completed, run the machine at a slow speed first.
(2) According to the product process requirements, complete the preparatory work before cabling. Hoist the cable core to be twisted onto the frame and select whether to use the twisting method with a twist or without a twist. Then, lead the core from the reel to the front end of the distribution reel After passing through the manual twisting head, it passes through the wire mold seat. With the help of a traction cable, the cable head is led out. At this point, start the machine to run slowly to ensure that the led cable has sufficient length. After winding it several times on the traction wheel, start the machine again. After a certain period of operation, the twisted cable can be wound onto the reel.
2. Operation of the hoisting drum and brake
Keep the cage frame at the top horizontal position, tighten the brake, open the bearing shell, use a crane to lift the wire reel into the frame, close the bearing shell and tighten the bolts, release the brake, adjust the lifted wire reel to the lower position, the brake must be tightened, and then lift the other wire reels according to the above method.
3. Precautions
Non-production personnel must stay away from the site. After the machine is started, no one is allowed to enter the restricted area. When replacing the wire reel, the power must be cut off first before changing the reel to prevent electrical failure. After production is completed, the power must be cut off before leaving the site. When performing maintenance, the power should be cut off first, and you may only enter the site after the machine has completely stopped. Never perform repairs during production. During repairs, the electrical parts should be supervised by a dedicated person or the circuit breaker box should be locked to prevent accidents.
Today, the editor will introduce the operation and precautions of the stranding machine to everyone:
1. Preparations before starting the machine
(1) The operator first checks the lubrication of all rotating parts of the machine, whether the position of the speed change handle is in place, whether all parts of the machine are normal, whether the cage flips flexibly, whether the twist pin is placed correctly, whether the cradle bolt is tightened, and whether all safety devices are in good condition. After the inspection is completed, run the machine at a slow speed first.
(2) According to the product process requirements, complete the preparatory work before cabling. Hoist the cable core to be twisted onto the frame and select whether to use the twisting method with a twist or without a twist. Then, lead the core from the reel to the front end of the distribution reel After passing through the manual twisting head, it passes through the wire mold seat. With the help of a traction cable, the cable head is led out. At this point, start the machine to run slowly to ensure that the led cable has sufficient length. After winding it several times on the traction wheel, start the machine again. After a certain period of operation, the twisted cable can be wound onto the reel.
2. Operation of the hoisting drum and brake
Keep the cage frame at the top horizontal position, tighten the brake, open the bearing shell, use a crane to lift the wire reel into the frame, close the bearing shell and tighten the bolts, release the brake, adjust the lifted wire reel to the lower position, the brake must be tightened, and then lift the other wire reels according to the above method.
3. Precautions
Non-production personnel must stay away from the site. After the machine is started, no one is allowed to enter the restricted area. When replacing the wire reel, the power must be cut off first before changing the reel to prevent electrical failure. After production is completed, the power must be cut off before leaving the site. When performing maintenance, the power should be cut off first, and you may only enter the site after the machine has completely stopped. Never perform repairs during production. During repairs, the electrical parts should be supervised by a dedicated person or the circuit breaker box should be locked to prevent accidents.