There are many safety accidents that occur when using high-speed stranding machines. Many people cause accidents when using industrial machines because they usually neglect certain safety details. Therefore, it is recommended that everyone pay close attention. For example, in industry, machines such as copper binding machines, wire bundling machines, copper stranding machines, wire stranding machines, extruders, and press extruders are frequently used. Wire stranding machines are also widely used in industrial manufacturing. Next, I will explain the precautions to pay attention to.
Whether the safety devices are complete, whether the operating components are flexible and stable, and whether they are loose.
Close the protective cover, check if there are people or other unsafe factors around the machine, sound the alarm first before starting the machine, and it is forbidden to use jog mode instead of normal start to run the equipment for a long time.
Regularly check and tighten the screws at the wire reel frame bearing caps and other parts to prevent loosening.
After going online and changing the line, check whether the top of the pay-off rack is firmly pressed and locked.
When the equipment is operating, it is not allowed to cross the operating parts, and it is forbidden for anyone to linger or walk in the designated equipment danger zone.
When the equipment is operating and it is necessary to observe the wire storage on the payout reel, it should be observed from the head or tail of the hoist drum. Usually, it is not allowed to observe from the middle of the drum to prevent accidents.
When the equipment is running, do not change gears, and do not wipe or clean the equipment.
When the equipment is operating, be sure to continuously monitor its running condition. If an abnormality occurs, you should stop it immediately for handling.
The vehicle cannot be driven if equipment malfunctions are not resolved.
When using a hoist, it is prohibited to pull at an angle, lift improperly, or overload. The lifting cable and belt should be checked regularly, and if damaged, use should be stopped immediately for replacement.
When the stranded wire on the stranding machine is twisted, care should be taken to avoid crushing the die holder.
Maintain a clean and unobstructed work environment.
If there are scrap wires and debris under the stranding machine, clear them before starting the machine.
Spools are neatly arranged in designated areas. Empty spools are promptly transported out of the passage.
Pay attention to fire sources and prevent fires. If any equipment parts are found to be overheating or emitting smoke, stop the machine immediately and report it to the relevant personnel immediately.
Whether the safety devices are complete, whether the operating components are flexible and stable, and whether they are loose.
Close the protective cover, check if there are people or other unsafe factors around the machine, sound the alarm first before starting the machine, and it is forbidden to use jog mode instead of normal start to run the equipment for a long time.
Regularly check and tighten the screws at the wire reel frame bearing caps and other parts to prevent loosening.
After going online and changing the line, check whether the top of the pay-off rack is firmly pressed and locked.
When the equipment is operating, it is not allowed to cross the operating parts, and it is forbidden for anyone to linger or walk in the designated equipment danger zone.
When the equipment is operating and it is necessary to observe the wire storage on the payout reel, it should be observed from the head or tail of the hoist drum. Usually, it is not allowed to observe from the middle of the drum to prevent accidents.
When the equipment is running, do not change gears, and do not wipe or clean the equipment.
When the equipment is operating, be sure to continuously monitor its running condition. If an abnormality occurs, you should stop it immediately for handling.
The vehicle cannot be driven if equipment malfunctions are not resolved.
When using a hoist, it is prohibited to pull at an angle, lift improperly, or overload. The lifting cable and belt should be checked regularly, and if damaged, use should be stopped immediately for replacement.
When the stranded wire on the stranding machine is twisted, care should be taken to avoid crushing the die holder.
Maintain a clean and unobstructed work environment.
If there are scrap wires and debris under the stranding machine, clear them before starting the machine.
Spools are neatly arranged in designated areas. Empty spools are promptly transported out of the passage.
Pay attention to fire sources and prevent fires. If any equipment parts are found to be overheating or emitting smoke, stop the machine immediately and report it to the relevant personnel immediately.